Separation internals: Field Installation and Inspection To Enable The Potential For Good Performance

Recorded On: 11/06/2018

The process design of a separator many times requires solutions with a number of complex separation internals, which combined will provide the desired process performance. Even with the best designs, if the separation internals are not fabricated according to the defined requirements, do not fit in the vessel correctly, or even worse, are not properly installed, all the process design efforts are worthless. Field installation and inspection verification of internals is a critical step. This presentation has the goal to describe how a proper factory inspection and field installation of the separation internals needs to be carried out. The installation and inspection must address the key issues that might occur to avoid poor separator performance.

This webinar is categorized under the Projects, Facilities, and Construction discipline.  

Joao Paulo Sena

Senior Project Manager, TechnipFMC

Mr. Sena is a senior project manager for TechnipFMC, based in Rio de Janeiro, Brazil. Joao Paulo has extensive management experience on EPCI (Engineering, Procurement, Construction and Installation) projects for oil, gas and water processing modules (pressure vessels, skids, separation internals) for the upstream and downstream markets. He has a Masters of Sciences degree in Aeronautical Engineering by the Brazilian Air Force Institute of Technology (ITA).

SPE Webinars are FREE to members courtesy of the



11/06/2018 at 9:30 AM (EST)   |  90 minutes
11/06/2018 at 9:30 AM (EST)   |  90 minutes
20 Questions
0.15 CEU/1.5 PDH credits  |  Certificate available
0.15 CEU/1.5 PDH credits  |  Certificate available